Telco Disarm Sequence; Testing; Horn Speaker Test; Bell Test - Bosch ICP-SOL2-P User Manual

Control Panel
5.10.2

Telco Disarm Sequence

Use this function to automatically disable the call forward sequence upon disarming the
system.
How to Program the Telco Disarm Sequence
1.
2.
3.
Notice!
To program a "#" in the Telco Disarm Sequence, enter [*2].
4.
Notice!
To disable the Telco Disarm Sequence, enter the Call Forward Sequence as [*5] (terminator)
for Step 3.
Digit Required
0
1
2
3
4
5
6
7
Table 5.5: Dialing Digits
5.11

Testing

The following functions let you confirm that your system is operating correctly:
5.11.1

Horn Speaker Test

Hold the [1] key until two beeps sound.
The horn speaker sounds for 2 sec.
5.11.2

Bell Test

Hold the [2] key until two beeps sound.
The bell output operates for 2 sec.
Bosch Security Systems, Inc.
Enter your Master Code, followed by the [3] and [#] keys (for example, [25803#]). Three
beeps sound, and the STAY and AWAY indicators flash.
Press the [2] key followed by the [#] key to select the Telco Disarm Sequence. Three
beeps sound.
Enter the Call Forward Disable Sequence (for example, [#61#] to disable the No Answer
Call Forward sequence, or [#21#] to disable the Call Forward Immediate Sequence).
Press the [#] key when finished. Two beeps sound, and the STAY and AWAY indicators
turn off.
Number to Program
0
1
2
3
4
5
6
7
Operation with ICON LCD Codepad | en
Digit Required
8
9
10
*
#
4-sec Pause
Terminator
User's Guide
23
Number to Program
8
9
0
* 1
* 2
* 3
* 5
2014.05 | 01 | F01U298028