Codepad Alarms; Codepad Duress Alarm; Codepad Panic Alarm; Codepad Fire Alarm - Bosch ICP-SOL2-P User Manual

18 en | Operation with ICON LCD Codepad
3.
To delete other User Codes, repeat this procedure as many times as required.
5.4

Codepad Alarms

5.4.1

Codepad Duress Alarm

A codepad duress alarm is used as a silent hold-up alarm. This only occurs when the number 9
is added to the end of any valid user code being used to disarm the system (for example,
[25809#]). A duress alarm is only useful if your system is reporting back to a monitoring
station. Domestic reporting (such as a mobile phone) cannot decipher which type of alarm
occurred.
5.4.2

Codepad Panic Alarm

An audible alarm activates when you press the [1] and [3] keys or the [*] and [#] keys
simultaneously.
Contact your installer to disable the codepad panic alarm function or to silence the codepad
panic alarm.
5.4.3

Codepad Fire Alarm

The horn speaker emits a distinct fire sound when you press the [4] and [6] keys
simultaneously.
Contact your installer to disable the codepad fire alarm function or to silence the codepad fire
alarm.
5.4.4

Codepad Medical Alarm

An audible codepad Medical Alarm activates when you press [7] and [9] simultaneously.
Contact your installer to disable the codepad medical alarm function or to silence the codepad
medical alarm.
5.4.5

Codepad PIN Error (Access Denied)

Codepad PIN error restricts the number of times an invalid user code can be used in an
attempt to operate the system. When the number of incorrect code attempts equals the
number programmed by your installer, the system activates an alarm condition. If reporting
back to a security monitoring station, the system sends an Access Denied report.
To shutdown and lockout a codepad for a period of time (0 sec to 150 sec), ask your installer
to program this function.
5.5

Isolating Zones

Use isolating zones to manually disable one or more zones before arming the system. Once a
zone is isolated, you can access that zone during the armed state without activating an alarm.
For example, you need to isolate a zone because before arming the system a PIR detector may
be false alarming, or you need to leave a pet inside a particular zone while away.
Isolating zones is performed by one of two methods. Method two is optional and only allows
those user codes programmed by your installer to have access to isolate zones.
5.5.1

Standard Isolating

Standard isolating allows all operators to isolate zones without knowing a valid user code.
How to Isolate a Zone
1.
2014.05 | 01 | F01U298028
Press the [*] button to delete the selected User Code. Two beeps are heard and the STAY
and AWAY indicators turn off.
Press the [*] button twice to enter the Isolating Mode. Three beeps are heard and the
STAY indicator flashes.
User's Guide
Control Panel
Bosch Security Systems, Inc.