Advertisement
2
2
Print the data you have created and load the sheet in the Craft ROBO
1
Check the Cut line and Print data
ROBO Master window
Preview button
Preview window
Preview of cut data
Close button
Change display
buttons
Preview of cut data
Preview of print data
and print data
Click the Preview buttons
to display the Preview window.
Use the Change Display button to display the print data and the
cut data separately, or superimposed.
After checking the data displayed, click the Close button
return to your usual Create Drawing window.
Media Trial Kit User Guide
2
2
Print the data you have created
Load the [Card with Craft Paper Backing]
sheet from your Media Trial Kit in your
printer.
to
Click the Output to Printer button
display the Output to Printer window. Check
that your printer is displayed in the printer
box and then click the [OK] button to start
printing.
3
Printer output button
to
Specify the cutting conditions
Output to Craft ROBO button
Click
Click the Output to Craft ROBO button
driver name reads Graphtec Craft ROBO, and then click the
[OK] button to start the Craft ROBO Controller.
Select "Card with Craft Paper Backing" in the Media Type
box.Click the [Next] button to proceed to the "Blade cap
adjustment" step. Attach the yellow cap displayed on the
screen to the cutter plunger tip.
20
, confirm that the
Select "Card with
Craft Paper Backing"
Advertisement
