Advertisement
Safety Precautions
Do not attempt to lubricate the Craft
ROBO's mechanisms.
• Such action may cause it to break down.
Do not clean the Craft ROBO using a
volatile solvent such as thinner or
benzine.
• Such action may impair its performance.
During cutting or plotting, provide
enough space around the Craft ROBO
so that the loaded sheet will not hit
any objects in its vicinity.
• Such contact may cause cutting or
plotting to go out of alignment.
To Ensure Safe and Correct Use
1
CAUTION
Prohibited
Prohibited
Contact prohibited
When using indoor lighting such as a
fluorescent lamp or an electrical lamp,
provide a distance of at least one
meter between the Craft ROBO and the
light source.
• Closer proximity of such a light source
may cause the sensors to malfunction.
When using the cutter, make sure that
the correct blade adjustment cap for
the selected Media Type is attached.
• An overly extended blade will damage
the cutting mat and adversely affect the
cutting quality.
Move the pen carriage slowly when
moving it manually in order to load the
sheet for cutting or for other reasons.
• Moving it quickly may damage the Craft
ROBO.
7
Advertisement
