Advertisement
3
3
Specify the drawn line as a cut line, and then print out the design
1
Specify the cut line
Output Settings button
Click
Click
Make sure that this checkbox is checked
Click the Output Settings button
Output Settings window.
Click "Cutting Settings", and then click the [Cutline
Settings] button to display the [Cut Specifications]
window. Make sure that the Color checkbox for the
Cutline is checked. Click the [OK] button, and then click
the [OK] button in the Output Settings window.
2
Check the Cut line data and the Print data
ROBO Master window
Preview window
Close button
Preview of cut data
and print data
to display the
Click the Preview button
Use the Change Display buttons to display the print data and the
cut data separately, or superimposed.
After checking the data displayed, click the Close button
return to your usual Create Drawing window.
Media Trial Kit User Guide
2
Preview button
Preview of cut data
Change display
buttons
Preview of print data
to display the Preview window.
3
Print the data you have created
Printer output button
Load the film label sheet from your Media
to
Trial Kit in your printer.
Click the Output to Printer button
display the Output to Printer window. Check
that your printer is displayed in the printer
box and then click the [OK] button to start
printing.
to
11
Advertisement
