Table of Contents
Advertisement
User Presets
NOTES:
•
For information on recalling and saving user presets using the web-based user
interface, see the
•
For information on recalling and saving user presets using SIS commands, see
"User presets (DVI, RGB, and YUV inputs
and Response Table for SIS
User presets are used when a shortcut is needed to quickly recall a group of settings that
relate to the current content or current input.
The
User Recall
and save user presets. The
of image parameters for the currently selected input. The
applies a saved preset to the selected input. Each input has sixteen available user presets
that are used to recall or save settings.
The table below details the settings that are saved and recalled in a user preset.
User Preset Saved Settings
Primary Menu
Picture Control
Advanced Config
Saving or recalling a preset
1.
Select an input from the front panel of the SME 100 (see item
Features" section on page 11.
2.
Press the Menu button until the
LCD display.
3.
Press the Next button until the desired submenu (
display.
4.
Rotate either adjust knob until the desired preset is shown on the LCD display.
NOTE: Select the
5.
Press the Next button on the
button on the
"Control
Page" section on page 77.
Commands" section.
and
menus shown in figure 16 on page 23 are used to recall
User Save
menu creates presets by saving the current set
User Save
Saved Settings
Horizontal Position
Vertical Position
Horizontal Size
Vertical Size
Brightness
Aspect Ratio
Presets
option if a user preset is not desired.
N/A
menu to recall the selected preset. Press the Next
Recall
menu to save the current parameters to the selected preset.
Save
only)" on page 140 of the
menu recalls and
User Recall
Contrast
Color
Tint
Detail
Zoom
b
in the
primary configuration menu is shown on the
or
) is shown on the LCD
Recall
Save
SME 100 • Front Panel Operation
"Command
"Front Panel
24
Advertisement
Table of Contents
