Table of Contents
Advertisement
About the Auto Image Submenu
NOTES:
•
When the auto-image feature is enabled and a new input signal is detected, the
SME 100 first attempts to apply values that were stored in auto memory to the input
signal (if the auto memory feature is enabled). If no auto memory exists, values that
are obtained from the auto-image feature are applied to the new input signal.
•
If the auto-image feature is disabled and no auto memory picture information exists,
the SME 100 uses default picture settings when an input signal is connected.
•
See the
information on how the
•
For information on enabling or disabling the auto-image feature using the web-based
user interface, see the
•
For information on enabling or disabling the auto-image feature using
SIS commands, see "Auto-image" on page 134 of the
Table for SIS
When an input is connected to the SME 100 and the
automatic image adjustment is applied to the input signal. Auto-image measures where the
active areas start and stop and adjusts the input signal accordingly, so that the output image
fills the window. How the screen is filled is determined by the
(see the
"About the Aspect Ratio
The table below details the settings that are affected when auto-image is turned on.
Auto Image Affected Settings
Primary Menu
Input Config
Picture Control
NOTE: The remaining configuration options are left unchanged when auto-image is
enabled.
Auto-image is useful in applications where a variety of input sources are likely to be
encountered, such as on a lectern or podium where guest laptops might be connected.
"About the Auto Memory
Auto Image
"Encoder Settings
Commands" section.
Submenu" section on page 41).
Affected Settings
Horizontal Start
Vertical Start
Pixel Phase
Horizontal Position
Vertical Position
Submenu" section on page 38 for more
and
submenus affect each other.
Auto Memory
Page" section on page 88.
"Command and Response
submenu is set to
Auto Image
Aspect Ratio
Horizontal Active Pixels
Vertical Active Lines
Horizontal Size
Vertical Size
SME 100 • Front Panel Operation
, an
On
submenu
40
Advertisement
Table of Contents
