LG V-NET AC Smart II Advanced Control Smart Owner's Manual page 39

2. AC Smart II Installation
3
. ʻUnit Registrationʼ screen is displayed to register a unit. Enter the unit information and press [Add]
button. See the following table for the information to enter.
After entering unit
information, click on
[Add] button
Item Description
Enter the type of unit
Type
- Air conditioner, Ventilator, Eco V DX, On/Off device, AWHP
Enter the name of unit. The name can be entered to maximum of 20
Name
letters.
Enter the physical address of the unit. The physical address value is a
Address
number in the range of 00~FF and cannot be duplicated.
Enter the model of the unit. Maximum of 20 characters can be entered
Model
for the model.
Enter the maximum power consumption of the unit. The power must
Capacity
not exceed the set value. You can enter up to maximum of 5 digits.
2-24
Installation/Owner's Manual