LG V-NET AC Smart II Advanced Control Smart Owner's Manual page 72

4. AC Smart II Menu
Item
Fan level
Lock
User mode
Set Temperature
Operation
Mode
[On/Off unit setting item]
Item
Operation
4-23
AC Smart
This sets the fan speed of the ventilator. You can adjust the level by considering the
indoor level of contamination.
- Low: This sets the fan level to low.
- High: This sets the fan level to high.
- Super: This sets the fan level to maximum speed.
- Auto: This is set to maintain the optimal condition by measuring the indoor level of
contamination automatically.
You can set the lock function so that the user cannot operate the ventilator individually.
- All lock: This is set so that the ventilator cannot be operated.
- All unlock: This is set so that the ventilator can be operated.
You can designate the additional....
- Humid On : This enables the Humid function. Currently this cannot be designated.
- Humid Off : This disables the Humid function. Currently this cannot be designated.
* Humid function is provided only Eco V DX.
- Heater On : You can set your heating to ensure supply of heated air in winter when
low outdoor temperature.
- Heater Off : heater function is disabled.
- Enable power save: Ventilator operates in the most efficient condition to save the
power consumption.
- Disable power save: This disables the power save function.
- Enable quick operation: This enables the unit to operate in maximum performance to
prevent the expansion of contaminated indoor air or humidity to other space. It is
recommended to use this when the indoor contamination is severe.
- Disable quick operation: If the quick operation mode is in operation, this stops the operation.
The user can set the desired indoor temperature.
You can set the operation and stopping of the Eco V DX
- Operation: You can operate the Eco V DX
- Stop: You can stop the operation of the Eco V DX
You can set the operating mode of the indoor unit function of Eco V DX
- Cool: This operates the indoor unit to run cool operation. Execute when the
indoor temperature is high.
- Heat: This operates the indoor unit to run heat operation. Execute when the
indoor temperature is low.
- Auto: The unit evaluates the indoor condition and maintains optimal condition
automatically.
You can turn On/Off the unit connected to AC SMART II.
• [Operate]: Operate the On/Off unit.
• [Stop]: Stop the On/Off unit.
Description
Description