LG V-NET AC Smart II Advanced Control Smart Owner's Manual page 66

4. AC Smart II Menu
2
. Press the button for each function and then press the [Apply] button. Refer to the following chart of
the description of each function.
[Indoor unit setting item] (4-8)
Item
Set temperature
Mode
Fan level
Lock
Power
4-17
AC Smart
Press the control tab to set the function
and then press the [Apply] button
The user can set the desired indoor temperature.
You can set the operating mode of the unit..
[Cool]: It operates in cool mode. You can set the desired temperature from
SET TEMP in the range of 18°C~30°C. When the desired temperature is lower
than the indoor temperature, it operates in fan mode.
[Heat]: It operates in heat mode. You can set the desired temperature from
SET TEMP in the range of 18°C~30°C. When the desired temperature is
higher than the indoor temperature, it operates in fan mode.
[Auto]: It evaluates the indoor and outdoor condition and maintains the
optimal condition automatically.
You can set the fan level of the unit..
[Low]: This sets the fan level to low.
[Med]: This sets the fan level to med.
[High]: This sets the fan level to high.
You can enable and disable the lock function so that the user cannot directly
set each unit.
[On]: This sets the lock function. When the lock function is set, all functions of
the unit installed indoor can be controlled using only AC Smart..
[Off]: This cancels the lock function. When the lock functionis canceled, the
unit installed indoor can be individually controlled.
You can operate or stop the unit.
Description