Setting The Operating Time Search Condition - LG V-NET AC Smart II Advanced Control Smart Owner's Manual

Setting the operating time search condition

You can set the search condition for the accumulative operating time and monthly operating time. To
set the search condition, proceed as follows. Accumulative operating time is used as an example. You
can also set the search condition for the monthly operating time in the same way.
1
. Press the [Condition setting] button located at the ʻAccumulative operating timeʼ tab. ʻCondition
settingʼ screen to set the search unit and target is displayed.
3
. Set the search unit and target, and press the [Apply] button. Refer to the following table for detailed
description of the setting item.
When you press the [Condition setting] button, the
"Condition setting" screen will be displayed.
Press [Schedule pattern wizard] button
Installation/Owner's Manual
8. Statistical menu
8-6