LG V-NET AC Smart II Advanced Control Smart Owner's Manual page 67

Item
Power
Advanced
[Ventilator setting item]
Item
Mode
Fan level
Lock
Operation
[Detail control]
Run: This operates the unit.
Stop: This stops the unit.
When you press this button, you can set the control of the indoor unit in detail.
Refer to ʻControlling the unit in detailʼ in the next section.
You can designate the operating mode of the ventilator.
- Heat: Both inlet/outlet go through heat exchange device for ventilation. Use
this mode during summer and winter when the difference between the indoor
and outdoor is significant in terms of temperature and humidity.
- Normal: The exhaust air is ventilated without going through the heat
exchanger. Use this mode during spring and fall when the difference
between the indoor and outdoor is not too significant in terms of temperature
and humidity.
- Auto: This measures the indoor temperature and outdoor temperature and
automatically controls inlet and outlet. With this, the balance of the indoor air
is maintained to maintain the optimal condition.
This sets the fan speed of the ventilator. You can adjust the level by
considering the indoor level of contamination.
- Low: This sets the fan level to low.
- High: This sets the fan level to high.
- Super: This sets the fan level to maximum speed.
You can set the lock function so that the user cannot operate the ventilator
individually.
- All lock: This is set so that the ventilator cannot be operated.
- All unlock: This is set so that the ventilator can be operated.
You can set the operation and stopping of the ventilator.
- Operation: You can operate the ventilator.
- Stop: You can stop the operation of the ventilator.
When you press this button, you can set the control of the indoor unit in detail.
Refer to ʻControlling the unit in detailʼ in the next section.
Description
Description
Installation/Owner's Manual
4. AC Smart II Menu
4-18