4. AC Smart II Menu
AWHP unit control
When you select the AWHP unit from the Control/Monitoring screen, the control tab is displayed as
follows, and you can directly control the AWHP unit function.
For the AWHP unit, you can select the air/water temperature as the control temperature with the
remote controller. Even though you can set both the air and water temperature from the unit control
item of AC SMART II, the actual operation will be done based on the temperature set by the remote
controller.
Set the desired indoor air temperature,
outlet water temperature and hot water
Set the operating mode
Operate/Stop
temperature of AWHP unit.
and lock function.
AWHP unit.
Apply the current
setting
❈ Air/Water temperature can be set from the control tab, but in actual operation, the unit operates
based only on the temperature set in the remote controller of the two.
4-15
AC Smart