Registering Unit - LG V-NET AC Smart II Advanced Control Smart Owner's Manual

9. System Menu

Registering unit

When first installing AC Smart, you must register the unit to connect to AC Smart.
When you press the [Unit registration] button located at the bottom of the unit management menu, the
following ʻUnit registrationʼ screen will be displayed. Here you can register a new unit or edit/delete
existing units. Also you can automatically register the unit through unit search.
This is the part where you enter the information
to register/edit the indoor unit, ventilator, Eco V
DX, on/off unit and AWHP unit.
List of currently registered
units is displayed.
You can register the unit by automatically registering the unit or directly entering the unit information.
This section describes both methods of registering the unit.
Reference: Login authority for unit registration
To register a unit in AC SMART II, you must log in as installation specialist authority. You cannot
register the unit with administrator or user login authority.
Caution: Unit registration setting
This function is the menu used by the installation specialist when installing AC SMART
II. Be careful not to let the user reset the product by using this menu.
9-2
AC Smart
You can interface with other
external central controller.
The connected units can
be automatically
searched and registered.
Number of registered
units is displayed by the
type of connected units.
You can add a new unit or
edit/delete the information
of the existing unit.