Statistical Reference Date Setting - LG V-NET AC Smart II Advanced Control Smart Owner's Manual

11. Introduction to Advanced Environment setting

Statistical reference date setting

Statistical reference date is the date to calculate the operating time of the indoor unit for 1 month. Here
the operating time is calculated from the reference date to 1 day prior to the reference date in the
following month, and provided as statistical information in the statistical menu.
Reference: Reference date setting range
For the month without the set date, the last day of the month is used as the reference date. For
example, when you set the statistical reference date to 30th, the 28th is used as the reference date
for February because the 30th does not exist for February..
You can set the reference date to calculate the operating time of the indoor unit from the ʻStatistical
reference dateʼ tab.
1
. When you select ʻStatistical reference dateʼ from ʻAdvanced Environment Settingʼ menu, the
following screen will be displayed.
Enter the statistical reference setting item, and press the [Apply] button. For detail description of
each entry item, refer to the following table.
Item
Select date (day)
Applied period (day)
11-14
AC Smart
Set the statistical reference date. You can set from 1st to the 31st.
This is not an item you can enter, and shows the statistical start and end date
based on the date selected from "Select date".
After setting the statistical reference
date, press the [Apply] button
Description