HP Server rx2600 Installation Manual page 40

Troubleshooting Your System
Solving Hardware Problems
Table 2-2
If the system starts and you still have a problem, see "Accessing System
Diagnostics" on page 43.
The mouse doesn't work.
Make sure...
The mouse cable is correctly connected.
You are using the correct driver. If you
are using HP's enhanced mouse, ensure
that the correct driver is installed.
driver is provided with all Linux preloaded
systems.
You are using the latest BIOS
The mouse is clean.
The mouse itself is not defective.
If the system starts but you still have a problem, see "Accessing System
Diagnostics" on page 43.
Your system has no sound.
40
Your System Has a Hardware Problem (Continued)
How
1.
Switch off the system (not
necessary with a USB mouse).
2.
Plug the cable into the correct
connector on the back of the
system (color coding is used for
easy matching).
3.
Switch on the system.
Download the latest driver from HP's
Web at:
This
www.hp.com/go/bizsupport
Download the latest BIOS from HP's
Web at:
www.hp.com/go/bizsupport
Clean the mouse ball as shown below.
Replace the mouse with unit that is
known to work or try the mouse with
another system.
Chapter 2