Graphics Cards - HP Server rx2600 Installation Manual

Hide thumbs Also See for Server rx2600:
Table of Contents

Advertisement

WARNING
Chapter 1
For your safety always connect equipment to a grounded wall
outlet. Always use a power cord with a properly grounded plug,
such as the one provided with the equipment, or one in
compliance with your national safety standards. This equipment
can be disconnected from the power by removing the power cord
from the power outlet. This means the equipment must be
located close to an easily accessible power outlet.
1. Connect the power cords to the rear of the monitor and the computer.
(The connectors are shaped to go in one way only.)
2. Connect the monitor's power cord and the computer's power cord to a
grounded outlet.

Graphics Cards

Your system has three possible operating systems that you can choose
when you purchase it. Depending on the operating system you ordered,
you may have one of the following graphics cards installed:
Table 1-1
Type of Card
High End/ Extreme 3D
Entry 3D
Professional 2D
Here is a list of the URLs you can go to for more detailed information
about your graphics card:
ATI Radeon 7000, FireGL 4 and FireGL 8800 — for more
information, see:
http://www.ati.com/
NVIDIA Quadro4 900XGL and Quadro2 EX — for more information,
see:
http://www.NVIDIA.com/
Graphics Cards Available for Your System
HP-UX
ATI FireGL 4
ATI Radeon 7000
Setting Up and Using Your System
Connecting Devices
Linux
NVIDIA Quadro4
900XGL
NVIDIA Quadro2 EX
ATI Radeon 7000
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zx6000

Table of Contents