HP Server rx2600 Installation Manual page 16

Setting Up and Using Your System
System Description
Feature
Accessory Card Slots
Optical Drive
System Board Connectors
Management Card
(optional)
16
Workstation: One AGP Pro 4X 32-bit slot supporting 1.5V AGP cards
(≤50W) - optional.
Three 64-bit 133MHz Peripheral Component Interconnect (PCI-X) slots,
supporting all bridges and multifunction PCI-X devices. All three PCI-X
slots comply with PCI-X Specification.
Server: Four 64-bit 133MHz Peripheral Component Interconnect
(PCI-X) slots.
NOTE:
Hewlett Packard has done extensive testing of PCI, PCI-X, and
AGP cards to ensure proper operation with this system. A full list of HP
supported cards is available at
http://www.hp.com/support/itanium_tpl. If you are considering using a
non-supported card, please review the errata notices at
http://www.hp.com/support/itanium_ipf. These will inform you of any
issues HP is aware of and help ensure that your system remains trouble
free.
Models include either a slimline 8x DVD-ROM/CD-RW combo drive or a
slimline 8x DVD-ROM drive.
•
One ATA-100 capable IDE connector
•
Main power supply connector (plus a redundant power connector)
•
Main chassis fan connectors
•
Processor fan connectors
•
Status panel connector
•
Three PCI-X connectors and one AGP card connector for zx6000
and four PCI-X connectors for rx2600 systems. The PCI-X
connectors are 64-bit, 133MHz slots that support all bridges and
multi-function PCI and PCI-X devices.
•
Management card (optional)
•
Two internal SCSI connectors and one external connector
•
25-pin Serial connector (with console/remote/USP extensions -
requires breakout cable)
•
15-pin VGA connector
•
10/100 Management LAN
Description
Chapter 1