Printing A Status Sheet; Printing A Status For Copy Mode - Fuji Xerox DocuPrint C2090 FS User Manual

1.
Press the <Menu> button on the control panel. Use the <▼> buttons to select [Configuration Need
Password] and press <Set>.
2.
Use the <◄/►> buttons to select [Configuration - System] and press [Set].
3.
Use the <◄/►> buttons to select [Power Time Saver] and press [Set].
4.
Use the <◄/►> buttons to select [5 min.], [10 min.], [30 min.], or [60 min].
5.
Press <Set> to confirm.
To enable the Warning Beep function, do the following:
1.
Press the <Menu> button on the control panel. Use the <▼> buttons to select [Configuration Need
Password] and press <Set>.
2.
Use the <◄/►> buttons to select [Configuration - System] and press <Set>.
3.
Use the <◄/►> buttons to select [Warning Beep] and press <Set>.
4.
Use the <◄/►> buttons to turn the Warning Beep ON/OFF.
5.
Press <Set> to confirm your setting.
To specify the Menu Time Out setting, do the following:
1.
Press the <Menu> button on the control panel. Use the <▼> buttons to select [Configuration Need
Password] and press <Set>.
2.
Use the <◄/►> buttons to select [Configuration - System] and press <Set>.
3.
Use the <◄/►> buttons to select [Menu Time Out] and press <Set>.
4.
Use the <◄/►> buttons to select [10 sec.], [20 sec.], [30 sec.], or [60 sec].
5.
Press <Set> to confirm.
To configure the setting for time and date, do the following:
1.
Press the <Menu> button on the control panel. Use the <▼> buttons to select [Configuration Need
Password] and press <Set>.
2.
Use the <◄/►> buttons to select [Configuration - System] and press <Set>.
3.
Use the <◄/►> buttons to select [Time & date] and press <Set>.
4.
Use the <◄/►> buttons to select [Time HH:MM] or [Date 20YY/MM/DD], and press <Set>.
5.
Use the numeric keypad on the control panel to enter the current time and date.

8.8 Printing a status sheet

To confirm the current status of the DocuPrint C2090 FS and verify that options are installed correctly, you
may want to print a status sheet.
8.8.1

Printing a status for Copy Mode:

1.
Make sure that the DocuPrint C2090 FS is turned on and is in Copy mode.
- 80 -