8.10.3 Fax
Save the scanned image use this function to save scanned image and send a fax by a fax printer after
configuring your fax items. It is necessary to install fax printer before using the function. Before faxing, User
can set some items, which are introduced as follows:
Scanner settings:
[Scan source]
[Scan source] is allows the user to select the document source from the [Document Glass] or [Auto
Document Feeder]. Check the flatbed glass and remove any document on it before you want to scan from
the [Auto Document Feeder].
[Scan mode]
[Scan mode] allows you to select either color, black & white or black & white enhanced scans. Black
and white scans will be smaller in terms of file size.
[Image Quality]
[Image Quality] determines the amount of detail collected from an original. There are pre-defined
options (200 and 400 dpi).
[Paper size]
Choose the document size as your scan region; each document size is supported by both scan sources,
[Document Glass] or [Auto Document Feeder]
[Multiple page scan]
For [Multiple page scan], if this option is checked, a message box appears asking for placement of the
next page to be scanned (only applicable if [Document Glass] is the selected Scan Source).
Notes:
•
When Multiple Page Scan Check Box available, in Tool Box copy mode Job log will record the Scan
Job and Print Job of each page.
•
If Job History Report is setting on automatic output, this report also will be included in output copy.
[Contrast]
- 91 -