Table of Contents
Advertisement
6. Copying
This chapter explains how to make basic copies and customize settings for special copy jobs.
6.1 Placing the originals
You can either place originals on either the ADF or on the document glass.
Before making a copy, make sure the transportation lock on the back of the part B is set to the unlock
position. Always keep the document glass clean to prevent dirty or blurry images.
Notes:
•
Do not place heavy objects on the document glass or press it with too much force.
•
If you intend to copy documents with multiple sheets, using the ADF is recommended.
To place the original on the document glass, do the following:
1. Open the document cover and place the original face-down on the document glass as shown. Use
the paper size marks on the left side of the document glass to position a document.
2. Close the document cover gently so that your original does not move.
To place the original on the ADF, do the following:
1. Slide the guides all the way outward.
2. Arrange your originals in order. The first page to copy should be on the top of the stack.
3. Insert the originals to be copied face up in the ADF. Slide the edge guides inward against the edges
of the originals.
- 59 -
Advertisement
Table of Contents
