Dsc Individual Id - Icom IC-M502 Instruction Manual

6
DSC OPERATION

DSC individual ID

A total of 40 DSC address ID's can be programmed and
named with up to 10 characters.
Programming address ID
q Push [DSC/ENT] to select the DSC menu.
w Rotate the channel selector to select "Set-up" and push
[DSC/ENT].
Sel item
RCV calls
DTRS set
˘Set-up
e Rotate the channel selector to select 'Add ID,' then push
[DSC/ENT].
Set-up
˘Add ID
Delete ID
Offset time
r Set the distress ID and ID name, then push [DSC/ENT].
• Rotate the channel selector to select the character.
• Push [CH/WX] to advance the cursor.
• Push [SCAN] to move the cursor backward.
• Push [HI/LO] to cancel and exit the condition.
22
Add ID
ID:
NAME:
t Push [DSC/ENT] to program and to exit the condition.
Deleting address ID
q Push [DSC/ENT] to select the DSC menu.
w Rotate the channel selector to select "Set-up" and push
[DSC/ENT].
Sel item
RCV calls
DTRS set
˘Set-up
e Rotate the channel selector to select 'Delete ID,' then push
[DSC/ENT].
• When no address ID is programmed, the transceiver exits the
condition automatically.
Set-up
Add ID
˘Delete ID
Offset time