I Dsc Individual Id - Icom IC-M302 Instruction Manual

I DSC individual ID

A total of 30 DSC address IDs (9-digit) can be programmed
and named with up to 5 characters.
D Programming Address ID/Group ID
q Push [DSC•
] to enter the DSC menu.
POS
w Push [Y] or [Z] to select "
[DSC• ].
POS
e Push [Y] or [Z] to select "
," and push
Scrolls
," and push [DSC• ].
POS
r Push [Y] or [Z] to input 9-digit of the appropriate Individ-
ual/Group ID.
• Push [16• ] or [CH/WX•
9 DUAL
backward, respectively.
• Push [SCAN• ] to cancel and exit the condition.
TAG
1st digit '0' is fixed for a group ID. Thus an address ID input
cannot start with '0.' When you input 1st digit '0' and other 8
digits, the ID is automatically registered as a group ID.
t After inputting 9-digit ID, push [DSC•
acters ID name using [Y] or [Z].
• Push [16• ] or [CH/WX•
9 DUAL
backward, respectively.
• Push [SCAN• ] to cancel and exit the condition.
TAG
y Push [DSC•
] to program and exit the DSC menu.
POS
6
DSC OPERATION
] to move the cursor forward or
] to input 5 char-
POS
] to move the cursor forward or
6
15