Table of Contents
Advertisement
Safety and function
▀
Before using the product, the owner and/or other user must read and understand the content in
this manual. The directions must be followed. This is to make sure that the product is functioning
correctly and accidents and injuries are avoided. Incorrect use or incorrectly tuning can result in
damages to property and personal injury or lacking function in the product. The boiler room where
the product is installed, the chimney and other components must be approved according to current
legislations.
The commisioning of the product must be made by a proffesional, according to Effectas directions
and current legislations. Controls and tuning of the product should be made by a proffesional.
A chimney sweeper should also be contacted when commisioning the product. The electrical
connections must be done by a professional, according to Effectas instructions in this manual.
The casing outside of the burner must always be fitted on the boiler when the boiler is connected to
the electrical power. Before cleaning and maintenance of the product, make sure it is disconnected
from the power line.
It is strictly forbidden to open any doors when the burner is igniting. If any door or hatch is opened
when the burner is running, great caution must be taken. Any kind of interferance or using of other
than original spare parts can result in damage to the product or person. It also removes Effecta
from any liability.
This manual should be kept during the whole life span of the product. Any updates will be reported
on the Effecta web page: www.effecta.se.
8
Effecta AB Västra Rågdalsvägen 21 434 99 Kungsbacka Sweden +46-300 - 22320 info@effecta.se
Advertisement
Table of Contents
