Table of Contents
Advertisement
▀
Menu system
Shunt control
►
Room sensor
Room temp
Flow. temp.
Radiator pump
Max flow temp
Min flow temp
Max room temp.
Min room temp
Heating off
Outdoor temp
Heat curve
Slope
►
Adjustment
►
Energy saver
►
Lowering temp.
Mon
06 _ _ _ _ 22
Tue
06 _ _ _ _ 22
El. heater
►
El. step 3-6-9
Fuse A
El. heater
El. heater
Other settings
►
Weekday
Time
►
Calibrate sensors
►
Function test
►
Alarms
Language
Calibrate sensors
►
Givare G1
Givare G2
Givare G3
Givare G4
Givare G5
Givare G6
Givare G7
Givare G8
20
Effecta AB Västra Rågdalsvägen 21 434 99 Kungsbacka Sweden +46-300 - 22320 info@effecta.se
Options for the shunt control
Option of control, (ROOM, OUTDOOR or BOTH.
Option of set value of the room temperature
Temp. to radiator/underfloor heating G7.
On/Off control of radiator pump.
Maximum allowed temperature to the flow.
Minimum allowed flow temp.
Maximum allowed room temp.
Minimum allowed room temp. Shunt opens full at set temp.
Outdoor temp when heating turns off. Rad. pump is runned 1min/2hours.
Outdoor temperature at the outdoor sensor
The heating curve for the heating control (page 27).
Option of slope to the heat curve (page 27).
Option of adjustment to the heat curve (page 27).
Options for energy saver (such as day/time/temp control.
The amount of degrees to be lowered at choosen times.
Weekly schedule of lowering the indoor temp/ flow temp at choosen times. Please
note that for instance underfloor heating is slow and therefore takes time to reheat.
Options for the electrical heater.
Choose between different effects on the electrical heater. 1 phase is maximum 3kW
Current load to the fuse in Amps.
6 kW
Log of runtimes of the different electrical heating steps.
3 kW
Setting of current weekday
Setting of current time
Option to calibrate/adjust all the sensors connected.
Test mode of the products different functions.
Alarm log
Choice of system language
Calibration of each sensor +/- 4 °C
Advertisement
Table of Contents
