Recording And Playback - Korg SDD-200 Owner's Manual

RECORDING/PLAYBACK PROCEDURE
1. BASIC SETTING
:h Turn off power on the SDD-2000 and equipment to
SK?,^ I M'DI Cable t0 connect the
2000 MIDI IN jack to the MIDI OUT jack of the
board or other MIDI device.
™™J? lH ^S" On rear Panel/connections and
connect the amplifier and other equipment.
r^* turn °n
and other equipment.
peaks
-,? S°that the HEAD«OOM indicator
t6S OCCasional|y on the highest
2. RECORDING AND PLAYBACK
• NexSS ^ M'Di SW'tCh S° that 'tS LED illuminates-
REC
C I
^COWCU SEO
TWG
o
0
REC SYNC
?: NOTE OFF data processing setting
(See section on MIDI data processing.)
— This LED on
■©While keeping me MIDI sw.tcn
depressed, press the SEQ or
SAMPLING switch.
<D Press the REC switch to shift Dae*
and forth between "response
and "no response" to NOTE OFF
data
40