Korg SDD-200 Owner's Manual page 12

18 PROG/PARA (RECCAL)
In the delay mode, this switches between allowing
"program change" and allowing editing of individual
parameters. In the sequencer and sampling modes it
allows "recording calibration." (For details, see the
section on the REC CAL function.)
19 WRITE Switch
This is used to store programs in memory. For
details see the section on "Writing a Program."
OTY-nMEx4 mum*
0 0 0
I PWQGNQ.
3
; oi
Is*
MER
20 DISPLAY
Shows the program number and the values of par-
ticular parameters.
RAMMER
21 INCREMENTAL CONTROL -
This is used to adjust, set or select parameters, pro-
gram numbers, MIDI channels, and so on.
When used to set the delay time, this controller is
sensitive to how fast you turn the knob. It is designed
to change one step at a time when turned slowly,
and change in larger amounts when turned rapidly.