Korg SDD-200 Owner's Manual page 32

Begin signal input. Recording will begin when input
level reaches +3dB, as shown on the HEADROOM
indicator. The display will appear as shown here
EFFECT FEEDBACK TIME
□
--V, rEC
PROGRAMMER
UHHOBEHMB
Display (" rEC") flashes during recording
[S Press the REC switch (or foot switch connected lo
REC jack) when you want to end recording.
• If you don't press the REC switch or foot switch then
recording will end at the maximum time selected by
the TIME x 4 switch.
Press REC switch.-
REC SYNC
■a
CD
Si The recorded sound can now be played back.
The dispfay appears as shown here.
• In the sequencer mode, the recorded sound is
automatically reproduced as soon as recording has
been completed.
• In the sampling mode, the recorded sound is
repeated once each time a trigger signal is received
at the rear panel TRIG jack.
• To record, again, press the REC switch. This will
return you to step [2].
"PLAY1" indication means
that recorded sound can De
reproduced.
32