Korg SDD-200 Owner's Manual page 34

B RECORDING/PLAYBACK WITH MIL/i
SWITCH ON (FOR PITCH CONTROL)
ABOUT MIDI OPERATION
A MIDI keyboard (or other MIDI device) can be used
with the SDD-2000 to control the pitch of the reproduced sound
in the sampling and sequencer modes.
This kind of recording and playback requires attention
to the following operations:
1. Supported note range setting.
2. Sampling note setting.
3. MIDI data processing setting.
4. REC CALIBRATION
Each of these is described below.
Actual recording and playback procedures are described afterward.
1. SUPPORTED
NOTE RANGE SETTING
About supported note range.
This depends on the time mode. A sound recorded in
the *4 mode can be reproduced over a range of near
ly three octaves. A sound recorded in the x1 mode
can be reproduced over a range of nearly one octave.
This is feferred to as the supported note range.
Example with C as the lowest note:
in the x 4 mode
In the x 1 mode
04-
34