Korg SDD-200 Owner's Manual page 41

ocuucnucn muuc/oMifiruivu iviuuc
0 While keeping me MIDI switch
depressed, press the SAMPLING
® Press the TRIG OVERDUE switch
to shift back and forth between
"response" and "no response'*
to VELOCITY data.
3] VELOCITY data processing setting.
(See section on MIDI data processing.)
Press the SEQ (sequencer) or SAMPLING switch to
select the mode.
Delay mode parameter settings (frequency, intensity,
effect) will be carried over into the sequencer and
sampling modes.
Press SEQ or SAMPLING switch.
MTENSTTY T1MEX4
f*~PWQGNO 1 j DATA/TIMEImsf"
f V, - - -
PROGRAMMER
- asning
Indicates time mode
(x 4 mode shown here)
.5. The display will appear as shown here.
• Press the TIME x 4 switch to select the time mode
according to your requirements for recording time
and supported note range.
wee mo
REC SYNC
i
-0 While keeping the MIDI switch
depressed. Dress the SEO switch.
& Turn me INCREMENTAL CON
TROL knoo or play me W0\
keyboard to seiecte me lowest
note of the supported note range
[6j Set the supported note range.
(See section on supported note setting.)
«ec tug
TWGOVBPm SCO lAMJUMQ
REC SYNC
liiiunwr
-0 While keeping me MIDI switcn
depressed, press me SAM?l;nG
switch
Turn the INCREMENTAL CON
TROL knob or play me MiOi
keyboard to select the sampling
note.
2. Set the sampling note.
(See section on sampling note setting.)