Lockout/Tagout Procedure; Safety Considerations; Safety Hazards; Electrical Hazards - Wine Guardian WGS40 Installation, Operation And Maintenance Manual

Following is a typical example of a Caution message as it could appear in the manual:
Improper installation may result in the equipment malfunctioning and a safety hazard.
Read all of the installation instructions before installing the Wine Guardian unit.

Lockout/Tagout Procedure

1) Turn off the power switch (indicator light should be off)
2) Unplug the unit from the electrical outlet and cover the outlet to prevent
accidently plugging in the unit.
3) Turn off circuit breaker or disconnect switch at condensing unit.

Safety Considerations

The equipment covered by this manual is designed for safe and reliable operation when
installed and operated within its designed specifications. To avoid personal injury or damage
to equipment or property when installing or operating this equipment, it is essential that
qualified, experienced personnel perform these functions using good judgment and safe
practices. See the following cautionary statements.
Installation and maintenance of this equipment is to be performed only by qualified
personnel who are familiar with local codes and regulations, and are experienced with this

Safety Hazards

Exposure to safety hazards is limited to maintenance personnel working in and around the
unit. When performing maintenance, always use the Lockout/Tagout procedure, which is
described in this chapter. Observe the maintenance safety guidelines in this manual.

Electrical Hazards

Working on the equipment may involve exposure to dangerously high voltage. Make sure you
are aware of the level of electrical hazard when working on the system. Observe all electrical
warning labels on the unit.
24
CAUTION
RISK OF PERSONAL INJURY OR DAMAGE TO EQUIPMENT
IMPORTANT
type of equipment.