Table of Contents
Advertisement
Force IGMP Proxy version on WAN side: V2 is selected by default. Select V3 if
required.
Enable IGMP Snooping: Enable by ticking the checkbox .
Standard Mode: In standard mode, multicast traffic will flood to all
Blocking Mode: In blocking mode, the multicast data traffic will be
Enhanced IGMP: When enabled, IGMP packets will not flood to all bridge ports.
Allowed Mac Address: Displays the MAC address(es) allowed to pass throughput
LAN interface.
DHCP Server:
Enable with checkbox and enter DHCP Server IP address.
Static IP Lease List: A maximum 32 entries can be configured.
To add an entry, enter MAC address and Static IP and then click Save/Apply.
To remove an entry, tick the corresponding checkbox in the Remove column and
then click the Remove Entries button, as shown below.
bridge ports when no client subscribes to a multicast
group – even if IGMP snooping is enabled.
blocked and not flood to all bridge ports when there are
no client subscriptions to any multicast group.
This allows the Router to relay the DHCP packets to the
remote DHCP server. The remote DHCP server will provide
the IP address. This option is hidden if NAT is enabled or
when the router is configured with only one Bridge PVC.
52
Advertisement
Table of Contents
