Table of Contents
Advertisement
Chapter 6 Advanced Setup
This chapter explains the following screens:
6.1 WAN
6.2 LAN
6.3 NAT
6.4 Security
6.5 Parental Control
6.6 Quality of Service (QoS)
6.7 Routing
6.1 WAN
This screen allows for the advanced configuration of WAN interfaces.
•
To Add a WAN connection, click the Add button. To edit an existing connection,
click the Edit button next to the connection. To complete the Add or Edit, on the
opening screen, select VLAN Mux (see section 6.1.1) and then proceed to STEP
2 in section
4.2 Manual Quick
•
To remove a connection select its radio button under the Remove column in the
table and click the Remove button under the table.
•
Save/Reboot activates the new configuration.
VPI/VCI
VLAN Mux
Con. ID
Category
Service
Interface
Protocol
IGMP
NAT
6.8 DNS
6.9 DSL
6.10 Print Server
6.11 Interface Group
6.12 IP Sec
6.13 Certificate
Setup.
VPI (0-255) / VCI (32-65535)
Shows 802.1Q VLAN ID
ID for WAN connection
ATM service category, e.g. UBR, CBR...
Name of the WAN connection
Name of the interface for WAN
Shows bridge or router mode
Shows enable or disable IGMP proxy
Shows enable or disable NAT
45
Advertisement
Table of Contents
