4.2 Manual Quick Setup
STEP 1: Click Quick Setup and un-tick the DSL Auto-connect checkbox to
enable manual configuration of the connection type.
STEP 2: Enter the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI)
values. Select Enable Quality Of Service if required and click Next.
STEP 3: Choose an Encapsulation mode.
Choosing different connection types provides different encapsulation modes.
•
PPPoA- VC/MUX, LLC/ENCAPSULATION
•
PPPoE- LLC/SNAP BRIDGING, VC/MUX
•
MER- LLC/SNAP-BRIDGING, VC/MUX
•
IPoA- LLC/SNAP-ROUTING, VC MUX
•
Bridging- LLC/SNAP-BRIDGING, VC/MUX
Untick this checkbox to enable manual
setup and display the following screen.
18