Table of Contents
Advertisement
3.3 Login P rocedure
Perform the following steps to login to the web user interface.
NOTE:
The default settings can be found in
STEP 1: Start the Internet browser and enter the default IP address for the device
in the Web address field. For example, if the default IP address is
192.168.1.1, type http://192.168.1.1.
NOTE:
For local administration (i.e. LAN access), the PC running the browser
must be attached to the Ethernet, and not necessarily to the device. For
remote access (i.e. WAN), use the IP address shown on the
Information
STEP 2: A dialog box will appear, such as the one below. Enter the default
username and password, as defined in
Click OK to continue.
NOTE:
The login password can be changed later (see
screen and login with remote username and password.
14
section
3.1.
section 3.1 Default
Section 9.6.3
Device
Settings.
Passwords).
Advertisement
Table of Contents
