Table of Contents
Advertisement
The Device Setup screen allows the user to configure the LAN interface IP address,
subnet mask, and DHCP server. To enable DHCP, select Enable DHCP server and
enter starting and ending IP addresses and the leased time
Since the router occupies the first two IP addresses (192.168.1.1 and 192.168.1.2),
the default private address range provided by the ISP server in the router is
192.168.1.3 through 192.168.1.254.
If NAT is disabled, Enable DHCP Server Relay will be displayed as an option. To
enable it, select the Enable DHCP Server Relay radio button and enter the DHCP
Server IP Address. This allows the router to relay the DHCP packets from the remote
DHCP server. The remote DHCP server will provide the IP address.
To configure a secondary IP address for the LAN port, click the checkbox shown.
STEP 7: Click Next to continue. To enable the wireless function, select the radio
button (as shown) and input a new SSID (if desired).
Click Next to display the final setup screen.
23
Advertisement
Table of Contents
