Table of Contents
Advertisement
Chapter 3 Web User Interface
This section describes how to access the device via the web user interface (WUI)
using an Internet browser such as Internet Explorer (version 5.0 and later).
3.1 Default S ettings
The factory default settings of this device are summarized below.
•
LAN IP address: 192.168.1.1
•
LAN subnet mask: 255.255.255.0
•
Administrative access (username: root , password: 12345)
•
User access (username: user, password: user)
•
Remote WAN access:
•
Remote (WAN) access (username: support, password: support)
•
WLAN access:
enabled
•
Service Set Identifier (SSID): Comtrend_xxxx,
where xxxx are the last-four digits of the MAC address of the wireless interface.
Technical Note
During power on, the d evice i nitializes all settings to default values. It will then
read the configuration profile from the permanent storage section of flash memory.
The default attributes are overwritten when identical attributes with different values
are configured. The configuration profile in permanent storage can be created via
the w eb u ser i nterface or t elnet u ser i nterface, or ot her m anagement protocols.
The factory default configuration can be restored either by pushing the reset button
for more than five seconds until the power indicates LED blinking or by clicking the
Restore Default Configuration option in the Restore Settings screen.
enabled
11
Advertisement
Table of Contents
