Table of Contents
Advertisement
Consult the table below for field descriptions.
Field
Filter Name
Protocol
Source IP address
Source Subnet Mask
Source Port (port or port:port)
Destination IP address
Destination Subnet Mask
Destination Port (port or port:port)
INCOMING IP FILTER
By default, all incoming IP traffic is blocked, but IP traffic can be allowed with filters.
To add a filter (to allow incoming IP traffic), click the Add button.
On the following screen, enter your filter criteria and then click Apply/Save.
Consult the table below for field descriptions.
Description
The filter rule label
TCP, TCP/UDP, UDP, or ICMP.
Enter source IP address.
Enter source subnet mask.
Enter source port number or range.
Enter destination IP address.
Enter destination subnet mask.
Enter destination port number or range.
59
Advertisement
Table of Contents
