Table of Contents
Advertisement
5.2
Manual Quick Setup
STEP 1: Click Quick Setup and un-tick the DSL Auto-connect checkbox to enable
manual configuration of the connection type.
STEP 2: Enter the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI).
Select Enable Quality Of Service if required. Click Next.
STEP 3: Then, choose the Encapsulation mode. Select Enable 802.1q (by ticking
the box) if required, and input a number for the VLAN ID. Click Next.
Un-tick this checkbox to enable manual setup and display
the following screen.
34
Advertisement
Table of Contents
