Bios Error Beep Codes - Silicon Graphics Altix XE340 User Manual

5: Server BIOS Information

BIOS Error Beep Codes

56
When you have completed the system configuration changes, select this option to leave the BIOS
Setup Utility and reboot the computer, so the new system configuration parameters can take effect.
Select Save Changes and Exit from the Exit menu and press <Enter>.
Discard Changes and Exit
Select this option to quit the BIOS Setup without making any permanent changes to the system
configuration, and reboot the computer. Select Discard Changes and Exit from the Exit menu and
press <Enter>.
Discard Changes
Select this option and press <Enter> to discard all the changes and return to the AMI BIOS
Utility Program.
Load Optimal Defaults
To set this feature, select Load Optimal Defaults from the Exit menu and press <Enter>. Then,
select OK to allow the AMI BIOS to automatically load Optimal Defaults to the BIOS Settings.
The Optimal settings are designed for maximum system performance, but may not work best for
all computer applications.
Load Fail-Safe Defaults
To set this feature, select Load Fail-Safe Defaults from the Exit menu and press <Enter>. The
Fail-Safe settings are designed for maximum system stability, but not for maximum performance.
During the POST (Power-On Self-Test) routines, which are performed each time the system is
powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process.
The error messages normally appear on the screen.
Fatal errors are those which will not allow the system to continue the boot-up procedure. If a fatal
error occurs, you should consult with your system manufacturer for possible repairs.
007-5536-001