Table of Contents
Advertisement
Description of control keys and LEDs
(1)
In recording/standby mode: No function
In playback mode:
In programming mode: Press to move the cursor to the left.
(2)
In recording/standby mode: No function
In playback mode: Press to increase playback speed.
In programming mode: Press to move the cursor up.
(3)
Enter key
In recording/standby mode: No function
In playback mode: No function
In search mode: Start playback.
In programming mode: Press to confirm your selection.
(4)
In recording/standby mode: No function
In playback mode: Press to switch playback from reverse to forwards.
In programming mode: Press to move the cursor to the right.
(5)
In recording/standby mode: No function
In playback mode: Press to increase playback speed.
In programming mode: Press to move the cursor down
(6)
REC:
The LED lights up red during recording.
(7)
FULL:
The LED lights up red if the hard disk is full.
(8)
RUN:
The LED lights up red when the rotating wheel is used.
(9)
PLAY: The LED lights up green during playback.
(10)
NET:
The LED lights up yellow if a LAN connection is active.
(11)
ACTIVE: The LED lights up yellow if an option is activated
(PTZ control, search function, rotating wheel, ...).
Press to switch playback from forwards to reverse.
9
Advertisement
Table of Contents
