Rs232C Setup; Pantilt Setup (Ptz Control) - Abus eytron Installation Manual

RS232C SETUP

Here you can change the RS232 settings.
RS232C SETUP
SPEED
LENGTH
STOP B IT
PARITY
SELECT: ▲▼ CHANGE VALUE + -

PANTILT SETUP (PTZ control)

PANTILT SETUP
COMMAND SETUP
SPEED SETUP
SELECT MENU: ▲▼, & [ENTER]
COMMAND SETUP
COMMAND SETUP
CHANNEL 01
MODEL PELCO-D
PTZ-ID 001
BAUDRATE 9600 BPS
CMD DELAY 1 MSEC
COMMAND PAN/TILT STOP
LENGTH 07
CODE FF 01 00 00
00 00 01
SELECT: ▲▼, CHANGE VALUE : +-
CHANNEL
Use the +/– buttons to select the camera for which you want to change the setup.
MODEL
The digital recorder supports 9 programmed PTZ cameras. Select a camera type with the +/–
keys. The following types are available:
YOKO, ON-D, PELCO-D, PELCO-P, ACCUDOME, HMC-250, SCC-641, VIDO AU-GXX, AECD-
2000, HID-2404 and DRX-502A.
PTZ ID
Here you can define up to 255 ID numbers. Give each high-speed motor
PTZ camera its own ID number to distinguish the cameras.
115200
Move the cursor using the direction keys
8
Use the – and + keys to change the values of the
1
NONE
selected menu item.
To exit a menu item, press the menu key (15).
Move the cursor using the direction keys
Confirm your selection with Enter (3) to open another
submenu.
To exit a menu item, press the menu key (15).
Move the cursor using the direction keys
Use the – and + keys to change the values of the
selected menu item.
To exit a menu item, press the menu key (15).
28
▲▼ .
▲▼ .
.
▲▼