Table of Contents
Advertisement
Connection setup
Press the SETUP key (2) to go to the connection setup.
IP/PORT
Click "MANUAL" to enter data manually.
1. Enter the recorder name under "DVR Name".
2. Enter the IP address of the recorder under "IP Address".
3. Enter the port number under "PORT".
4. Always enter "admin" under "USER ID".
5. Under "PASSWORD", enter the Administrator Password of the digital recorder.
After making all your settings, click "SAVE" and confirm with "OK". To cancel input, click
"CANCEL".
If you now press the "Connect" key (5), the following window opens:
Select a recorder and click "OK" to establish a connection.
32
Advertisement
Table of Contents
