Table of Contents
Advertisement
MONITOR SETUP
VGA SETUP:
Confirm this menu item with Enter (3) to open a submenu.
In this submenu, you can change the VGA resolution.
Possible resolutions are:
Use the +/– buttons to change the value.
IMPORTANT: This submenu is available it a VGA board (accessory) is fitted in the device.
COLOR BAR TEST:
You can change the colour settings in this submenu.
CONFIGURATION
CONFIGURATION
HDD MANAGEMENT
TIME / DATE SETUP
CAMERA SETUP
INTERVAL SETUP
ALARM SETUP
EVENT POPUP SETUP
BUZZER SETUP
PASSWORD SETUP
SYSTEM INFORMATIONEN
SELECT MENU: ▲▼, & [ENTER]
HDD MANAGEMENT
HDD SETUP:
Confirm this menu item with Enter (3) to open another submenu.
Here you can view the hard disk status and clear the hard disk.
To clear the hard disk, select "HDD CLEAR" and confirm with Enter (3), then enter your
"Admin" password. The hard disk is automatically cleared.
To exit this menu item, press the menu key again (15).
HDD INFORMATION:
Confirm this menu item with Enter (3) to open another submenu.
This shows information about hard disks used in the system.
To exit this menu item, press the menu key again (15).
TIME/DATE SETUP
Confirm this menu item with Enter (3) to open another submenu.
Using the direction keys
Use the –/+ keys to change the specification accordingly.
With the direction keys, select line 4 and change the time (hour/minute/second).
Also you have the possibility to change the format of date, time and month. To exit this menu
item, press the menu key again (15).
640 x 480 /75HZ
800 x 600 /60HZ
1024 x 768 /60HZ
Press the direction keys
item.
To confirm your selection, press Enter (3).
To exit a menu item, press the menu key (15).
(2 and 5), you can switch between: year, month, day.
▲▼
(2 and 5) to select a menu
▲▼
17
Advertisement
Table of Contents
