Table of Contents
Advertisement
PTZ/SAVE (PTZ camera control)
Here you can change your PTZ camera settings:
Under "Circular Monitoring", enter the channel switching interval (4SEC).
Under "Scan Rate", choose scan rate.
Under "PTZ Type", enter the PTZ type. (PELCO D, PELCO P, ACCUDOME ...)
Set the baud rate under "PTZ Baudrate".
IMPORTANT: For all Security-Center Highspeed PTZ cameras, select (PELCO D / 2400 bps).
NETWORK SPEED
Here you can change the network speed value
36
Advertisement
Table of Contents
