Ptz Control Menu - Abus HDCC900 2 Series User Manual

Live view
(2)
Select the live cast stream type to be used for all
cameras simultaneously.
Select the audio output of the recorder for two-way
audio control via the web interface.
(3)
This function is only available if a microphone and
speaker are connected to your PC while you have
the live cast open.
1 = RCA audio output 1
2 = RCA audio output 2

PTZ control menu

PTZ control
Presets
The actions of all buttons in the PTZ control menu, plus
presets/patrols, are always applied to the camera
currently selected (red frame). Depending on the camera
model, not all functions may be available.
Special commands
Patrols
Parameter Description
Move the camera in the desired
PTZ control direction using the buttons. Set the
zoom
activates the horizontal scan.
Open the camera menu (if available)
Special
3D zoom (zoom in/out to a drawn
commands
screen)
Centring mode
Speed Speed at which the cameras are
manually moved to positions
Navigate to tab
Preset
positions. Up to 256 present positions
can be accessed/stored from here
(depending on the camera model).
a) Move the camera to the desired
position.
b) Select a list entry and press
The current camera position is
assigned to the selected preset.
c) Press
The camera then moves to the
previously stored position.
Navigate to tab
Patrol
Up to four patrols can be
accessed/stored from here.
a) Start a patrol with
remains active until another PTZ
command is sent to the camera or the
patrol is stopped manually with
b) Program a patrol with
preset positions, speed and hold time.
c) Delete the content of a patrol with
, focus and iris
manually. The button
to carry out preset
to access a stored preset.
to carry out patrols.
. The patrol
. Enter the
.
.
17