Description Of Control Keys And Leds - Abus eytron TV8901 Installation Manual

Description of control keys and LEDs

(1) In recording/standby mode: No function
In playback mode:
In programming mode:
(2) In recording/standby mode: No function
In playback mode:
In programming mode:
(3) Enter key
In recording/standby mode:
In playback mode:
In search mode:
In programming mode:
In recording/standby mode: No function
In playback mode:
In programming mode:
(5) In recording/standby mode: No function
In playback mode:
In programming mode:
(6) REC: The LED lights up red during recording.
(7) FULL: The LED lights up red if the hard disk is full.
(8) RUN: The LED lights up red when the rotating wheel is used.
(9) PLAY: The LED lights up green during playback.
(10) NET: The LED lights up yellow if a LAN connection is active.
(11) ACTIVE: The LED lights up yellow if an option is activated
(PTZ control, search function, rotating wheel, ...).
Press to switch playback from forwards to reverse.
Press to move the cursor to the left.
Press to increase playback speed.
Press to move the cursor up.
No function
No function
Start playback.
Press to confirm your selection.
Press to switch playback from reverse to forwards.
Press to move the cursor to the right.
Press to increase playback speed.
Press to move the cursor down
8