Table of Contents
Advertisement
EXTERNAL DEVICE
EXTERNAL DEVICE
TCP / IP SETUP
RS232C SETUP
PANTILT SETUP
SELECT MENU : ▲▼, & [ENTER]
TCP/IP SETUP
TCP / IP SETUP
IP CONFIG SETUP
DDNS SETUP
CONNECTION SETUP
DHCP SETUP
SELECT MENU : ▲▼, & [ENTER]
IP SETUP
IP SETUP
MAC ADRESS
00-0A-A2-05-01-B7
IP ADDRESS
192.168.001.105
IP PORT
GATEWAY
000.000.000.000
SUBNET MASK
255.255.255.000
DHCP SETUP
SELECT MENU : ▲▼, & [ENTER]
Here you can make settings for the TCP/IP protocol.
You can define this data automatically (DHCP AUTOMATIC) or manually (DHCP MANUAL),
depending on the network connection.
To define data manually, use the + or – keys to enter the IP address, the SUBNET MASK, the IP
PORT and the GATEWAY.
DHCP SETUP:
Here you can make the TCP/IP setting automatically or manually.
Press Enter
(3) to change the DHCP mode.
CONNECTION SETUP:
Under TIMEOUT, you can set the maximum time required for connecting to the PC.
Define the number of connection attempts under RETRY COUNT.
Use the direction keys ▲▼ to change the cursor position and the + and – keys to change the
values of the selected item.
Move the cursor using the direction keys
Confirm your selection with Enter
another submenu.
To exit this menu item, press the menu key (15).
Move the cursor using the direction keys
Confirm your selection with Enter
another submenu.
MANUEL
Move the cursor using the direction keys
Confirm your selection with Enter
Use the – and + keys to change the values of the
selected menu item.
05000
To exit a menu item, press the menu key (15).
MANUEL
27
▲▼
.
(3) to open
▲▼
.
(3) to open
▲▼
.
(3).
Advertisement
Table of Contents
