Ptz Control Menu - Abus NVR10010 User Manual

Select the audio output of the recorder for two-way
audio control via the web interface.
(3)
This function is only available if a microphone and
speaker are connected to your PC while you have
the live cast open.
1 = RCA audio output 1
2 = RCA audio output 2

PTZ control menu

PTZ control
Presets
The actions of all buttons in the PTZ control menu, plus
presets/patrols, are always applied to the camera cur-
rently selected (red frame). Depending on the camera
model, not all functions may be available.
Special com-
mands
Patrols
Parameter Description
Move the camera in the desired direc-
PTZ con- tion using the buttons. Manually ad-
trol
just the zoom
button activates the horizontal scan.
Open the camera menu (if availa-
Special
ble)
com-
3D zoom (zoom in/out to a drawn
mands
screen)
Centring mode
Speed Speed at which the cameras are man-
ually moved to positions
Navigate to tab
Preset
positions. Up to 256 present positions
can be accessed/stored from here
(depending on the camera model).
a) Move the camera to the desired po-
sition.
b) Select a list entry and press
The current camera position is as-
signed to the selected preset.
c) Press
set. The camera then moves to the
previously stored position.
Navigate to tab
Patrol
trols. Up to four patrols can be ac-
cessed/stored from here.
a) Start a patrol with
mains active until another PTZ com-
mand is sent to the camera or the pa-
trol is stopped manually with
b) Program a patrol with
preset positions, speed and hold time.
c) Delete the content of a patrol with
, focus
and iris . The
to carry out preset
to access a stored pre-
to carry out pa-
. The patrol re-
.
. Enter the
.
16