System Installation - SeaLevel PIO-32.PC User Manual

System Installation

The PIO-32.PCI can be installed in any of the PCI expansion slots.
1. Turn off PC power. Disconnect the power cord.
2. Remove the PC case cover.
3. Locate an available PCI slot and remove the blank metal slot cover.
4. Gently insert the PIO-32.PCI into the slot. Make sure that the adapter
is seated properly.
5. Replace the screw.
6. Replace the cover.
7. Connect the power cord. Installation is complete.
Sealevel Systems PIO-32.PCI
Introduction and Installation
Page 2